Detailed specifications for course P4040
The PID Instruction for the PLC-5 Troubleshooting Basic Process Control
This five-day, hands-on technical workshop is specifically designed to:
provide personnel with the basic skills
required to troubleshoot and maintain Allen-Bradley PLC-5 systems which
use the PID (Proportional-Integral-Derivative) instruction for
use a common-sense non-theoretical approach to introduce the basic concepts of PID control to personnel having little or no background in higher mathematics
The following topics will be presented through hands-on exercises and demonstrations:
Wiring the 120VAC control and the
4-20mA instrumentation circuits
Programming Block Transfers for the analog input and output signals
Configuring the 1771-IFE and 1771OFE2 analog input and output modules
Checking the calibration and adjusting zero and span as necessary for pulse-rate/analog converter, thermocouple transmitter and I/P transducer
Programming and tuning the PID instruction for a flow control loop
Programming and tuning the PID instruction for a heat control loop
Experimenting with the individual effects of the proportional, integral, derivative, and feedforward parameters to optimize tuning for either setpoint changes or for process load upsets
Programming controls for setpoint changes, auto/manual modes, etc.
Programming math functions for signal scaling and for conversions between raw data values and engineering units
Programming basic operator alarms for out-of-tolerance system parameters and for input signal faults
Programming and experimenting with various control strategies and system hardware configurations
Troubleshooting problems and errors in programming, configuration, wiring, calibration, loop tuning, etc.
Systematically analyzing and tracking analog variables and math functions through the ladder logic program
Collecting runtime process data for trend line graphing and logging
Entry-level programming of basic HMI/SCADA operator interfaces
This course will be conducted as a laboratory workshop using the Problem/Solution method of instruction. There are absolutely no transparency projectors and no PowerPoint slide shows involved. Instead, all of the course material is presented through a series of hands-on exercises which each student performs on real-world equipment. By working through the same types of tasks which are commonly encountered in the field, students not only master the material more rapidly but also improve their problem-solving skills and develop the confidence required to apply their new abilities on the job. Most students, particularly those with a maintenance technician background, respond enthusiastically to the challenges of this dynamic style of instruction.
Students successfully completing this course will be awarded 4.0 Continuing Education units.
In order to provide each student with an individual workstation and with adequate instructor attention, the class size is normally limited to six students. All hands-on exercises in this course are performed on training hardware which focuses on air-flow and temperature control projects to provide experience with both fast and slow responding systems.
It is required that each student have a good working knowledge of the Allen-Bradley PLC-5 hardware system and the RSLogix5 software package. Existing skills must include the processing of analog input and output signals. Please note that this is not an entry-level class and students who do not have the prerequisite skills should not attend this workshop.
It is required that each student have a good working knowledge of Microsoft Windows and also adequate mouse and keyboard skills to enable active participation in the lab exercises. Although the pace of this workshop will not accommodate students who lack these skills, we offer a separate one day hands-on computer workshop to provide these prerequisites.
© Copyright - R.H.Beaufort - Charleston, SC Updated: July 7, 2012